Dremel 4300 vs 4000 – What’s the Difference?

Dremel 4300 vs 4000 – What’s the Difference?

Whether you’re a beginner or a seasoned DIY-er, rotary tools are indispensable. They might be small, but they easily replace the need for many tools while also providing added precision. When paired with all the different attachments they have, it’s a mighty powerful tool that every craftsman should have.

If you’re stuck on choosing between the Dremel 4300 vs 4000, here’s a quick guide to help simplify the matter and help you make the right decision for your requirements.

The Dremel brand is one of the most popular tool companies with a respectable range of rotary tools. Each tool that Dremel offers has been uniquely designed to deliver quality and flexibility. Among their specialty ranges lie both the Dremel 4300 and Dremel 4000.

They’re essentially both corded and variable speed rotary tools with a speed range of 5,000 – 35,000 RPM. A powerful motor backs each and comes in a similar ergonomic design. That said, is the 4300 the right tool for you or can the 4000 fulfill your rotary motor needs?

Let’s find out.

Our Recommendation: Why Dremel 4300 is Best
$103.97
Dremel 4300 is the best choice if you want to get the job done with more precision, With its 3-Chuck system, you can work efficiently and with the powerful 1.8 amp powered engine, rest assured, you are in for the win.
Buy Now Learn More
We earn a commission if you click this link and make a purchase at no additional cost to you. 10/30/2020 05:29 pm UTC

The Main Differences Between Dremel 4300 vs Dremel 4000

The main differences between Dremel 4300 vs Dremel 4000 are:

  • Dremel 4300 you’re limited to the Dremel kit it comes with, whereas Dremel 4000 has more attachments to its chuck design
  • Dremel 4300 is known to not be noisy and ultimately feels calm when using it, whereas Dremel 4000 has a loud noise
  • Dremel 4300 has a Pivot Light Mechanism, whereas Dremel 4000 is an older model that doesn’t have that included and it’s less expensive.

What is a Dremel 4300?

Dremel 4300 Engraver

One of the most powerful rotary tools a craftsman can have, the 4300 Dremel model excels in its versatility. It powers up a 1.8-amp variable speed motor which can rotate at 5,000-35,000 RPM, depending on your selection.

It comes with a universal 3-jaw chuck which provides compatibility of a variety of attachments. That said, its kit comes its own Dremel accessories, which includes:

  • Sanding/Grinding Bit with Guide: In order to provide precision with speed control, Dremel provides a guide for your sanding/ grinding operations. There are multiple Sanding and grinding drums provided ranging from ½” 60-Grit to 3/8” Aluminum Oxide Grinding Stones.
  • High Speed Cutter: A basic high speed circular cutting wheel is a fairly standard accessory; however, you also receive cut off wheels, lock-wood cutting wheel, and a multipurpose spiral cutting bit.
  • Detailer’s Grip & Flexible Shaft: To provide greater flexibility, the 4300 comes equipped with a flexible extender which will allow you to work on a variety of angles; while the detailer’s grip lets you be precise with your craftmanship.
  • Garden Tool Sharpener: As an added bonus, a safe tool sharpener is also present to replace the need for additional bits.
  • Cleaning Brush: Removes rust and helps polish materials with various brush and polishing Dremel bits.
  • Shield Attachment: Provides additional safety from flyaways.
  • Pivot Light: Illuminate the areas you’re working on to improve the precision, mobility, and safety of your rotary tool through the pivot light added within the 4300.
Our Recommendation: Why Dremel 4300 is Best
$103.97
Dremel 4300 is the best choice if you want to get the job done with more precision, With its 3-Chuck system, you can work efficiently and with the powerful 1.8 amp powered engine, rest assured, you are in for the win.
Buy Now Learn More
We earn a commission if you click this link and make a purchase at no additional cost to you. 10/30/2020 05:29 pm UTC

Features of Dremel 4300

  • 1.8 amp powered rotary tool with universal 3-jaw chuck
  • Has a varied RPM of 5,000 to 35,000
  • Comes with a variety of Dremel rotary tool accessories, depending on the tool kit you choose
  • Ball bearing construction
  • Can be used to cut, grind, sand, sharpen, polish and clean
  • Include Pivot Light for increased illumination.

Pros

  • Fitted with a powerful motor – With the 4300, you’re getting one of the most powerful DIY rotary bit for your workshop.
  • Contains a slew of attachments and rotary tool accessories – In a similar vein, the Dremel bits it comes with will equip you for most situations, and you can customize according to which tool kit you purchase.
  • Added Pivot Light – Get light coverage at various angles using its in-built illumination system.
  • 3 Jaw Chuck – Eliminates the need to buy additional collets for your attachments and significantly cuts down prep time for usage.

Cons

  • It Is Expensive – Although useful, this rotary tool requires more of an investment, especially from new crafters.
  • The case is Bulky – It comes within a hard storage casing, which is great for protection and organization; however, it is on the bulkier end.

Dremel 4300

Frequently Asked Questions About Dremel 4300

Here are a few of the most commonly asked questions about 4300 Dremel Series:

Generally, yes. The rotary motor is strong enough to work with a range of materials. That said, cutting ceramic may be challenging and not safe, so a specialized tool is recommended. You can refer to your manual to read instructions on various cuts.

Is the Universal 3-jack chuck the same as a multipro keyless chuck?

Yes, the multi pro keyless chuck operates in a similar way to a three jack chuck, and no additional purchase is required for using the tool.

What shaft sizes will the 3 jack chuck accommodate?

The chuck should cover mandrels from 1/32” and up to 1/8”. To get further information, you can review your instruction manual to know what accessories and attachments are available for your tool.

How to know which Dremel kit to buy?

If you’re looking for general purpose use, each kit will be able to cover a variety of tasks and will be able to perform its functions. If you require the rotary tool for specialized needs, read about their kits on the company’s website.

Can it cut through wood, metal or ceramic?

Generally, yes. The rotary motor is strong enough to work with a range of materials. That said, cutting ceramic may be challenging and not safe, so a specialized tool is recommended. You can refer to your manual to read instructions on various cuts.

What is a Dremel 4000?

Dremel 4000 Engraver

Very similar to its newer counterpart, the Dremel 4000 is a variable speed rotary tool which an RPM of 5,000-35,000 RPM. It does have a slight difference in power with its 1.6 amp compared to the 1.8 amp offered by 4300.

The Dremel 4000 comes with an EZ Twist nose cap with a collet lock system to ensure your bits stay in place during usage. It boasts the same 360-degree agronomic design for a comfortable grip and comes with in-built light. However, this differs from the pivot light, which provides more illumination and is attachable.

Furthermore, it includes all the Dremel accessories of the 4300 with attachments such as Flex Shaft, Plunge Router, Dust Blower, Right Angle Attachment, Shield Guard, and Guides. Other attachments can be purchased separately.

Dremel 4000 Rotary Tool Kit
$149.00
The Dremel 4000 is the more budget-friendly option of the two. With less power, it's still a great tool for the price and will get similar results without compromising the quality.
Buy Now Learn More
We earn a commission if you click this link and make a purchase at no additional cost to you. 10/31/2020 01:28 am UTC

Features of Dremel 4000

  • 1.6 motorized amp tool with an EZ Twist nose cap
  • RPM of 5,000 to 35,000
  • The kit comes with bits used for grinding stones, sanding, sharpening, polishing, cutting, cleaning and buffing.
  • Includes built-in light.

Pros

  • Electronic Feedback according to your project – With the 4300, you’re getting one of the most powerful DIY rotary bit for your workshop.
  • Is able to host more accessories – In a similar vein, the bits it comes with will equip you for most situations, and you can customize according to which kit you purchase.
  • Powerful motor for all-purpose use – Get light coverage at various angles using its in-built illumination system.
  • It is more cost-effective – Eliminates the need to buy additional collets for your attachments and significantly cuts down prep time for usage.

Cons

  • May heat up quickly – Although useful, this rotary tool requires more of an investment, especially from new crafters.
Dremel 4000 FAQ

Frequently Asked Questions About the Dremel 4000

Here are a few of the most commonly asked questions about the 4000 Dremel series:

Can I use the drill to cut through glass?

With the attachments present within the kit, it wouldn’t be safely possible to cut glass; however you have given its collet system, you can purchase attachments and accessories which would enable you to cut the material of your choice.

Ensure you’re using all the safety precautions and are following the instructions provided by Dremel or your third-party drill-bit provider.

What size is the shank?

The tool itself takes bits with a 1/8” shank; however, its versatility is increased through the use of various sized collets and can be used with all of Dremel’s accessories and attachments. Your kit will come with a few collets which will provide you with a range of possibilities.

How do I change the bits in my rotary tool?

If your collet accommodates your bits, you can simply twist the nut and insert your chosen bit. In case the collet is too big or small, you will need to swap it for a more appropriate collet.

You can do this by pressing the button on the front end of your tool and use the wrench to release the collet. Replace it with your preferred size and screw the nut back on. In case of any confusion, refer to your instruction manual.

Does the rotary tool come with a warranty?

If you buy from a licensed seller, then yes. Dremel offers a 2-year warranty with your Dremel products. The rotary tool is an investment, and therefore, it’s important to ensure you have protections in place in case you need them.

You’ll want to make sure that you use and store the product as recommended within the instructions to ensure the warranty stays intact. If you experience any problems, contact customer service before tinkering with it.

Dremel 4300 vs 4000

Dremel Rotary 4300 vs Dremel 4000: What to Look Out For

Each tool comes with its benefits and caveats. When making the decision for yourself, you’d need to evaluate your own requirements and conditions. That said, understand the criteria based on which you’ll be able to make your decision is important. Here are a few factors you should look out for:

Nature of Work

Your rotary tool should be in service of you and your work; so, consider the type of tool you need within your arsenal. With the corded tool variety, you’ll be getting unlimited power for a variety of applications. Take a moment to reflect on why you need the tool and what projects are you hoping to work on.

Ease of Use

When handling a power tool within your hands, you should be comfortable. It not only affects your safety but is important for precision and accuracy as well. Both models come with a similar feel and ergonomic design; yet, try to hold them within your hands to have an idea of how they feel before you make a purchase. That said, do remember the flex shaft and detailer’s grip the tool comes which can aid you in certain crafts.

Safety features

Each rotary tool comes with a similar set of safety attachments which you should be aware of. Depending on your use, you might need to purchase additional attachments or accessories which may sway your decision making. To make sure you’re following the proper precautions, refer to your instruction manual before any new usage.

Power and Speed

When it comes to speed, both models perform at a similar varied RPM of 5,000 – 35,000. There is a slight difference in power where the 4300 has the upper edge with a 1.8 amp as opposed to the 4000’s 1.6 amp. Evaluation of your crafting needs will help determine which power output you require.

Attachments & Accessories

With any kit you purchase, you’ll receive a host of attachments and accessories. Most standard kits will fulfill your baseline requirements and allow you to perform a host of functions. In case you need specialized accessories, you can check out which accessories are available in a given kit before making the purchase.

Additionally, you might want to consider what kind of nut is being provided. The 4300 3-jaw chuck reduces bit replacement times through its one fit functionality but limits the range of accessories you can use. The 4000 Dremel model will require different sized collets in order to operate with different bits, but it also allows you to use a greater variety of bits.

Affordability

Lastly, it’s important to consider the monetary cost of each kit and drill. The 4300 is more expensive than its counterpart, and it might be wise to purchase the 4000 with additional accessories to receive more bang for your buck. Consider all the costs of the tool and your project in order to make the right decision for yourself.

Dremel 4300 vs Dremel 4000

Dremel 4300 vs Dremel 4000: Which One Should You Get?

Given the similarities between the two, you wouldn’t be making the wrong choice when purchasing a rotary tool from Dremel. It may come down to simple preference and budget concerns for you. That said, our recommendation goes with the Dremel 4300.

Rotary tools are powered swiss army knives with their functionality and ease of use. There’s a lot of use you can get out of them. Therefore, while the 4300 would be an investment, its price tag is ultimately justified with the tool’s functionality, accessories, attachments, and quality you receive.

It’s a sturdy tool that comes with its own light for you to view your crafts more clearly and have more precision during your operations. Its 3-chuck system makes it easier to replace bits quickly, efficiently, and safely. With a 1.8 amp powered engine, you’ll be receiving the best quality for the price.

That being said, if you’re strapped on cash, it may be wise to choose the Dremel 4000. It’s a versatile tool with greater adaptability with its collet system and is powered by a 1.6-amp motor. You’ll receive similar results to the 4300 without feeling you compromise on quality.

Not to mention, you can have access to Dremel’s accessories and attachments which will help you customize your tool to be in aid of your projects. Its EZ Twist mechanism allows you to change attachments easily with the use of collets.

Both models are versatile and handy tools that you’ll get a lot of use from. The main difference you’d find is the price tag and some features which the older model might lack. Ultimately, think about your personal use and make the decision to add this all-in-one tool within your workshop.

Our Recommendation: Why Dremel 4300 is Best
$103.97
Dremel 4300 is the best choice if you want to get the job done with more precision, With its 3-Chuck system, you can work efficiently and with the powerful 1.8 amp powered engine, rest assured, you are in for the win.
Buy Now Learn More
We earn a commission if you click this link and make a purchase at no additional cost to you. 10/30/2020 05:29 pm UTC

Rotary Tool Safety Tips

Being an essential crafts tool, you’ll probably end up using the rotary tool a lot for various jobs. The tool itself comes with a variety of attachments and accessories which you’d be replacing every so often to scale up or down your machine. To get the most out of your tool, you’ll need to follow certain protocols for your safety and the maintenance of the rotary tool.

  1. Always start with the instructions – Before you start unpacking any bits or turn the tool on, skim through its instruction manual to look at the recommended handle and assembly instructions provided by the company. You want to be well versed in its usage and know how to use the tool for its various functions. Most manuals with come with instructions on how to use it for different surfaces and what bits or attachments are required. Therefore, take a little time to understand the tool before you get in it your hands.
  2. Make sure your bits are properly inserted within the tool – Although each model comes with a lock feature which holds your bits in place for use, it’s important to check for yourself as well. You’ll want to turn off the motor and unplug it before touching the nut or chuck and ensure the mandrel, drums, cutters, and accessories are properly inserted.
  3. Don’t Try To Use Damaged Accessories – In case your bit comes damaged or gets that way during use, replace it immediately. Damaged accessories and attachments can be a safety risk and should be taken seriously. If your tool is under warranty, contact the contact to know whether replacements are possible.
  4. Assume Position Before Operating – In order to use the rotary tool, stand away from the plan of your accessory to ensure you or any bystanders are taking the proper precautions.
  5. Keep Cords Away from Craft Area– Avoid any accidents by keeping its plugged cord away you’re your place of operations.
  6. Use Protective Gear – As a general rule of thumb with any craft tool, always wear proper attire and use appropriate gear to avoid personal injury from fragments or fly away.
  7. Clamp workpiece if required – When operating with smaller pieces of material, use clamps to hold a piece in position before using the tool. Holding it in your hand with the tool in the other can pose as a risk that could lead to injury.
  8. Let the rotary tool stop completely before placing on surfaces – The tool’s motors take a moment to shut off completely; therefore ensure that you don’t unnecessarily damage your surroundings by not being aware of the rotations after you’ve turned off the tool.
  9. Store accordingly – Always store the tool according to the instructions provided within the manual and store in a cool, dry place. You’ll want to store the bits within the box provided in other to keep them safe and not lose the tiny accessories within your workspace.

For more information on rotary tools, you may find the following articles useful:

David Borgogni

David is passionate about sharing his insights on top trending and mainstay products for the home. As an avid renovator, he has become well accustomed to the tools used to build houses, which in turn allows him to help others make better purchasing decisions when choosing which tools and equipment to use to renovate their homes.

Leave a Reply